1.18 User Profiles
The X5 pager supports up to 16 individual user profiles. User profiles contain information about alert
settings, display settings, certain network specific parameters and a list of capcodes that are active
when the profile is selected. If the X5 is fitted with a synthesised receiver, it is possible to use the pager
as multi-channel/multi-protocol receiver by specifying different network frequencies or baud rates in
each profile. Please refer to the X3 and X5 Programming user guide (Document number: 148-1001) for
further information.
The profile can be switched by the user manually from the system menu depending on the
configuration of the pager firmware. Profiles are always switch-able by a specific OTA message (see
Chapter 1.33 OTA/OAP (Over-The-Air/Over-Air-Programming) Messages).
Note:
The display of the currently active profile can be suppressed by disabling the Show
Profile feature in the feature settings.
To change the currently selected profile, activate the main menu from the home page by pressing the
MENU button. Select
Profiles
from the menu and press the right button, select the desired profile from
the list of profiles shown. The profile name and settings are determined at time of programming of the
pager. To see the currently active settings, select the profile and go through the menu options and
settings to see the currently active configuration of the selected profile. These settings can be changed
by the user but are not persistent. If the profile is switched all the settings will revert to the settings of
the originally programmed profile.
Doc No.102-1050M - X5 User Reference Manual
29 of 60
Figure 27: X5 home page with
Profiles enabled and shown.
Содержание X5
Страница 54: ...Appendix X5 Menu Structure Figure 46 Home Screen menu Doc No 102 1050M X5 User Reference Manual 54 of 60 ...
Страница 55: ...Figure 47 Main menu Doc No 102 1050M X5 User Reference Manual 55 of 60 ...
Страница 56: ...Figure 48 About Menu Doc No 102 1050M X5 User Reference Manual 56 of 60 ...