Infostream X5, Руководство пользователя

Страница: 10 / 60

If the Wall Charger option has been ticked in the Screen Settings menu, the screen will be inverted and
the navigation buttons reversed while the pager is on the wall charger. Note that the
Wall Charger
option is only available when the Screen Orientation Feature is enabled. The pager can still be
operated in a normal way, just upside down. The screen will revert to the normal orientation when the
pager is removed from the charger.
When charged via the AC-Adaptor the pager should fully re-charge (from a completely discharged
state) in approximately 3 - 4 hours. When charging via the USB interface from an average computer it
will take 4 - 6 hours for a full re-charge. If the battery is fully discharged it may take some minutes for
the pager to start up after being placed on the charger.
Note: If an alarm time or auto-on time has been set and the pager is turned off and placed on
the charger, the pager will automatically turn on when the alarm time or auto-on time is
due.
1.6 Charger Clip
The charger can operate horizontally on a flat surface or vertically mounted on the wall. When the
charger is wall mounted the lock switch in the centre of the charger should be set to locked. The pager
will click into the charger and be locked, thus preventing it from falling out. The charger has been
designed to be wall-mountable with the power cable connected to the bottom of the unit and with the
cable handing down. Affix the charger to the wall by sliding it down onto 2 screws (not supplied)
65mm apart.
If the charger is operated on a horizontal surface the lock switch should be set to unlocked so that the
pager easily lifts off the unit.
Doc No.102-1050M - X5 User Reference Manual 10 of 60
Figure 3: Wall charging