Infostream X5, Руководство пользователя

Страница: 26 / 60

Figure 23: Setting the Clock
1.16.3 Turning the Pager On or Off at a Specified Time
The pager can be automatically turned on or off at a specific time to be operational only during certain
hours of the day, this is useful for shift workers. From the Clock page press the green MENU button to
show the clock pop-up menu, select the
Auto on/off function, select Auto on and proceed similarly to
setting an alarm for both off and on times. If the Auto-Off time is chosen to be prior to the current time,
the pager will turn off at the Auto-Off time the following day. If the Auto-On time is chosen within the
same minute of the current time and the pager is then manually turned off the pager will turn on the
following day at the set Auto-On time.
1.16.4 Stopwatch tool
The pager contains a handy stop watch with up to 8 lap times and a time measurement resolution of
200ms. To activate the stopwatch function, enter the Clock page and press the MENU button to show
the clock pop-up menu. Select the
Stopwatch function. Press the CANCEL button to start or stop the
stopwatch. To get a lap time while the stopwatch is running, press the UP button. Up to 8 lap times can
be taken and are shown with the fastest time first. Press the MENU button and select from the pop-up
menu to reset either lap times only, or lap times and the current stop watch counter.
Note: The stop watch will continue to run if the stop watch page is left by pressing the LEFT
button, until the stop watch is manually stopped. This is useful to deal with incoming
messages or exit and re-enter the stop watch page without interfering with the measured time.
Doc No.102-1050M - X5 User Reference Manual 26 of 60