Infostream X5, Руководство пользователя

Страница: 9 / 60

Charging the Pager
The pager requires recharging after several days of continuous operation. Ideally, place the pager on
the charger during the periods when the pager is not in use. This will ensure the pager remains fully
charged at all times. The pager's battery is of the Lithium-Ion type and has no noticeable memory
effect. Over time, however, the capacity of the battery will gradually reduce as the battery ages.
When the pager is first placed on the powered charger it will display the charger screen showing the
current battery capacity. If the pager was turned on before it was placed on the charger and a button is
pressed, the screen will show the Home Page. If the pager was turned off before it was placed on the
charger, it will display the charging screen when a button is pressed. If the pager is turned off while
charging and the green button is held for more than 2 seconds, the pager will turn on.
Figure 2: Charging screen
If the pager is turned on, placed on the charger and no button activity or alert activity occurs, and after
the screen time-out period, the X5 will display the charging screen for two minutes before turning its
display off. If any button is pressed or a new message arrives while the pager's screen is turned off, the
X5 will turn the screen on and display the charging screen. To activate the home page press any button
while the charger screen is shown. After the screen time-out has expired the charging screen will again
be displayed and the screen turned off after an additional two minutes.
When the pager is on the charger the red LED on the top left side of the pager flashes to indicate the
charging state of the pager. The flashes indicate:
•
once every second - the battery is recharging
•
once every 2 seconds - the battery is fully charged
•
twice per second - the battery is <2% capacity, the unit will operate until the battery has more
charge
Doc No.102-1050M - X5 User Reference Manual 9 of 60