Infostream X5, Руководство пользователя

Страница: 36 / 60

1.24 Screen Settings
This option provides control on how the screen display operates. You can control the brightness of the
screen with three options, Maximum (Bright), Normal and Minimum (Dim).
Screen time-out determines how long the pager screen is displayed before going blank. It has the
following values: 30 secs, 45 secs, 60 secs, 75 secs and 90 Secs. The default setting is 30 seconds.
The shorter the screen time-out setting, the less drain there is on the battery.
Holstering the pager has no effect on the screen time-out unless Holster Key Lock is ON, in which case
the screen blanks 10 seconds after holstering.
Wall Charger controls how the pager operates when it is placed in the charger. If the charger is attached
vertically to a wall the pager is upside down as it re-charges. If this option is selected then whenever
the pager is being charged it inverts the display so that it appears the correct way up while in the
charger. The 4 navigation buttons are also reversed so they operate correctly in this position. The Red
and Green buttons are not reversed.
When the pager is removed from the charger the display and buttons automatically revert to their
normal orientation.
The Wall Charger option toggles from on or off. To change it, navigate to the option and press the
RIGHT button.
1.25 Alert Type
Alert Type controls volume or vibration options when the pager issues an alert. There are 3 items that
can be controlled: pager vibrate; level of the audible alert; and whether a reminder alert should sound.
Vibrate controls whether the pager vibrates with every alert. Toggle between vibrate ON and OFF by
navigating to the item and pressing RIGHT. The default is ON.
To control the audible alert you can select one of the 4 options: Silent, Escalating, Soft, Loud. Navigate
to the option you want and press RIGHT. Only one of the 4 options can be selected.
The escalating option causes the pager volume to increase while the alert is sounding. If the ‘Vibrate’
option is turned off and the ‘Silent’ audible setting is selected the pager will not issue any notification
for any alerts. The loud option plays a single loud tone while the alert is sounding. The default setting
is loud.
Reminder Beep controls whether the pager continues to issue an audible and/or vibrate notification
until the alert is unacknowledged. An alert will last for the Duration specified or until the alert is
acknowledged. If the alert remains unacknowledged the signal will be repeated every 2 minutes for the
specified duration. If the Alert Duration is set to continuous then Beep Reminder has no effect.
The Alert settings apply for all types of alerts, including low battery alerts.
Doc No.102-1050M - X5 User Reference Manual 36 of 60