68
Once Installed
Once the enclosure has been installed, you may refer to the Users Manual that came
with your system for further instructions on completing the hardware installation
process. The Users Manual will go on to explain details on installation / maintenance
of hard drives, controllers, optional modules (Supercapacitor battery, CBM, etc.),
cooling modules, power supplies, cable connections, topology configurations, etc.
Safety Reminders
If you must relocate the enclosure after installation
•
Cease all input / output transactions, shutdown the system, disconnect all the cables
(please refer to the User Manual for details)
•
Empty all drive bays (hard hard drive trays) and transport them separately in
safe packaging
•
Modules came installed within the enclosure need not be removed
When the system is in operation
•
Module and drive bays must not be empty! They must have a dummy cover / plate in
place to stabilized internal airflow!
•
Should a module fail, leave it in its place until you have the replacement item on-hand
to take its place
•
Allow at least 18~20cm of clearance space at the rear of the enclosure for ventilation
Avoid touching the PCB and gold-finger connections.
