64
Secure the enclosure by using two #6 32x10mm flathead screws at the rear and four
M5 x30mm screws on the forearm handles (forearm handles can also be secured
using M6 / 10-32 screws from the system accessory box).
M5/M6
/10-32
M5/M6
/10-32
5.2.3
Removing the Enclosure
*
Prior to removing the enclosure, power down your system (stop all I/O actions, please
refer to Users’ manual) and all hard drives have been removed!
*
It is strongly recommended that two people work together on this procedure
1. Remove the screws on the enclosure’s ears (shown above).
2. Pull the enclosure out until it is stopped by the release latch.
3. Use both hands to support the enclosure weight and use your index finger to
press and pull the release latches (indicated by the small
blue arrow
) towards
you. The larger blue arrow indicates the direction the enclosure should be
pulled towards.
With another person’s help, slowly pull the enclosure out of the rack.
