Infortrend EonNAS 3000 series Скачать руководство пользователя страница 59

Страница: 59 / 68

Slide Rail Kit

Unpacking the System

Use the “Unpacking List” to cross check all components have been received. The

basic contents include one GUI CD pack, Quick Installation Guide and RAID

Enclosure Installation Guide. For details on each slide rail kit contents, please refer

to specific kit installation details in this manual.

Component Installation Procedure

Please install components in the following order:

1. Rackmount rails onto the enclosure / rack / cabinet

2. Enclosure onto the slide rail and into the cabinet

3. Hard drives into drive trays and then into the enclosure.

4. Drive trays (with or without hard drives) into the enclosure

5. If Supercapacitor battery / FBM were purchased as an optional component, the

controller must be removed from the enclosure for installation.

NOTE

For detail procedures from step 3 and onwards, please refer to the earlier sections in

this hardware manual.

Tools Required

For each of the slide rail installation procedures, you will need the following tools:

•

One medium sized Phillips screwdriver

•

One small sized Phillips screwdriver

•

One medium size flat blade screwdriver

Содержание EonNAS 3000 series





































































Результаты поиска

Содержание EonNAS 3000 series

Отзывы:

Похожие инструкции для EonNAS 3000 series

Бренды по названию

Популярные бренды

Infortrend EonNAS 3000 series, Руководство по оборудованию

Результаты поиска

Содержание EonNAS 3000 series

Отзывы:

Похожие инструкции для EonNAS 3000 series

Бренды по названию

Популярные бренды