27
Figure 5-12
1. Device ID
The device ID is within 1 ~ 127. The default ID is 1.
Note
: The device ID is used for the control by remote controller.
Input the device ID in the controller before the control of DVR.
Refer to "Remote controller introduction" in section 1.3 for the
operation of controller.
2. Device name
The device name supports 1 to 20 characters string. The default
name is "Infinova DVR".
3. Language
The system supports English.
4. Video standard
2 video formats are optional, PAL and NTSC.
Note
: The video mode must consist with the mode of the camera
connected with DVR; otherwise the image may have problem like
black striation, snowflake, shadow and so on.
5. Opacity level
Set the opacity level of the menu, and 5 different levels are
available. The default level is opaque.
6. Output to
Two options: BNC and VGA. The main output of the DVR will
change to the set output after the device reboot.
7. VGA resolution
Options available for VGA output resolution:
80
×600-60Hz, 1024×768-60Hz, 1280×1024-60Hz,
1366×768-60Hz, 1440×900-60Hz, 800×600-75Hz,
1024×768-75Hz.
8. Screen saver
The system exits from the main menu when no any operation in a
setting period. The default is never.
Note
: This function is invalid in the interfaces of prompt box,
progress bar, playback, PTZ control, login and area setting.
9. Enable password protection
The system requires to input password when enter to the other
interfaces from preview interface if enable the password protection.
The default is "enable password protection".
5.5.2 Time Settings
In the preview mode, press
Ǐ
MENU
ǐ
key to enter the interface as
shown in Figure 5-1. Select "System" and press
Ǐ
ENT
ǐ
key to
enter the setting interface, and press
Ǐ
WIDE
ǐ
key to switch to
"Time" option, as shown in Figure 5-13.
Figure 5-13
1. Enable DST (daylight saving time):
if seleted, the time will be
delayed for an hour as per the DST system, e.g. the time 14:00 in
the none DST system will be changed to 15:00 in DST system.
2. Time zone:
Set the time zone as actual demand.
3. Local time:
Set the local date and time.
4. NTP Enable:
Move the cursor to the checkbox of "NTP Enable",
and press
Ǐ
ENT
ǐ
key to enable NTP, then move the cursor to the
field of "Server IP", and input IP address. "Enable NTP server
successfully" prompt appears if the setting succeeds, the system
time will keep synchronized with the NTP server. If the setting fails,
"Enable NTP server fail" appears.
5.5.3 Log Management
In the preview mode, press
Ǐ
MENU
ǐ
key to enter the interface as
shown in Figure 5-1. Select "System" and press
Ǐ
ENT
ǐ
key to
enter the setting interface, and press
Ǐ
WIDE
ǐ
key to switch to
"Log" option, as shown in Figure 5-14.
Figure 5-14
