30
shown in Figure 5-1. Select "System" and press
Ǐ
ENT
ǐ
key or
number key
Ǐ
9
ǐ
to enter the setting interface, and press
Ǐ
WIDE
ǐ
key to switch to "Backup" option, as shown in Figure 5-17.
Figure 5-17
1. Channel:
select the data in one channel or all channels to
backup.
2
.
Start time and End time
: Select the data in the period from
"Start time" to "End time" to backup.
3
.
Record type
: Backup the specific type of data, 3 types are
optional, scheduled, manual and alarm recording. The default is
"All".
After finishing setting, press "Forward" button to enter recording
file list. Select the desired file by moving
Ǐ
ǐ
and
Ǐ
ǐ
key, and exit
the list via
Ǐ
ǐ
and
Ǐ
ǐ
key, then the cursor moves to previous or
next control button. Then press
Ǐ
ǐ
key to move the cursor to
"Forward" button, and press
Ǐ
ENT
ǐ
key to enter backup interface,
and select the target location in the "Backup to" filed, U disk and
CD/DVD RW is optional. After finishing setting, moves the cursor
to "Backup", and press
Ǐ
ENT
ǐ
key to start the backup. Select
"Backward" button and press
Ǐ
ENT
ǐ
key to return previous menu.
Note
: Please refer to "5. Backup file to U disk" or "6. Backup file to
writer" in section 4.8 for detailed introduction on backup.
5.5.6 Advanced Settings
The advanced settings include software upgrade mode, reboot and
shutdown. Restore the system to default setting if the system run
abnormally.
In the preview mode, press
Ǐ
MENU
ǐ
key to enter the interface as
shown in Figure 5-1. Select "System" and press
Ǐ
ENT
ǐ
key or
number key
Ǐ
9
ǐ
to enter the setting interface, and press
Ǐ
WIDE
ǐ
key to switch to "Advanced Settings" option, as shown in Figure
5-18.
Figure 5-18
1. Upgrade mode:
The way to upgrade the system. The system
supports USB mode only. Select "USB" in the list, and move the
cursor to "Browse", and press
Ǐ
ENT
ǐ
key to pop up the dialog box
with the updated file list in the U disk. It's empty if there's no file.
Select the file, and press "Upgrade" button to perform the upgrade.
Press "Cancel" or
Ǐ
ESC
ǐ
key to return. If no U disk or U disk not
insert correctly, the system will pop up a confirmation box to
require user check the settings.
2. Restore to factory settings:
If the system runs abnormally due
to misoperation or other reasons, user could restore the system to
factory default settings. Move the cursor to "Default", and press
Ǐ
ENT
ǐ
key. The system will reboot automatically after restore
successfully.
3. Reboot and shutdown:
When reboot or shutdown the system,
the system will pop up a prompt to confirm the reboot or shut down.
If select "OK" and press
Ǐ
ENT
ǐ
key, the system will reboot or
shutdown. If choose "Cancel", and press
Ǐ
ENT
ǐ
key. The prompt
will close, and the system will not reboot or shutdown.
5.5.7 General Channel Settings
Figure 5-19
While the screen shows the main interface, press
Ǐ
MENU
ǐ
key to
