15
as "12345678", and the default langue is English.
The operating steps as follows:
1
st
Step: Press
Ǐ
ENT
ǐ
key to drop down user name list, move the
cursor to select the desired user name, and press
Ǐ
ENT
ǐ
key.
2
nd
Step: Move the cursor to the editing box, and press
Ǐ
ENT
ǐ
key
to enter editing status, then input the correct password, and then
press
Ǐ
ENT
ǐ
key to login. If need to cancel the login, select "Exit"
and press
Ǐ
ENT
ǐ
key.
Note
: The
Ǐ
IRIS+
ǐ
key could be used to cancel the password input
if input a wrong password.
A prompt dialog box will pop up if the user name or password is
wrong. After press
Ǐ
ENT
ǐ
key, the cursor will place at the "Login"
button, follow the steps above to login. The main menu will display
after login successfully, as shown in Figure 4-2.
Figure 4-2
4.2.2 User Authority
There're 12 operation authorities, as follows:
Network preview: Preview from client and network
Network playback: Playback from client and network
Local play: Playback recording file
View log: View log information
PTZ control: PTZ control
Alarm control: Alarm control
Parameters setting: Parameters setting includes display, time,
image parameters, channel, preview, recording, alarm input, output,
abnormity network and PTZ/COM settings
System management: Shutdown, reboot and upgrade system,
restore to factory setting
User management: User assignment (Administrator has user
management authority; the administrator can add and delete user
and modify user password. The common user can modify his
password only.)
Data management: Recording backup and hard disk management
When the user performs the above operations, he needs to input an
authorized user name and password, or he will fail to operate the
DVR or the control button is unavailable.
Note
: Please refer to section 5.4 for user authority setting.
4.3 Preview
The DVR's menu divides to parts follows:
(1) Preview
(2) Manual recording: press
Ǐ
REC
ǐ
key to turn on the recording
status list
(3) Playback: press
Ǐ
PLAY
ǐ
key to turn on play interface
(4) PTZ control: press
Ǐ
PTZ
ǐ
key to start the PTZ control
From keys combination, user can enter and switch among different
menus.
The default menu is preview status. In preview status, user could
live view the image transmitted by front-end cameras.
4.3.1 Switch Preview Modes
Press
Ǐ⬄ǐ
key to switch the preview mode among 1, 4, 9 and 16
screens.
4.3.2 Preview Setting
In the preview status, press
Ǐ
MENU
ǐ
key to enter main menu
interface, move the cursor to the icon "Preview", and then press
Ǐ
ENT
ǐ
key to enter the preview setting interface. Or press
Ǐ
2
ǐ
key to enter the interface.
Select the "monitor" drop-down list, press
Ǐ
ENT
ǐ
key to open the
drop-down list, select monitor 1 or 2, and then press
Ǐ
ENT
ǐ
key to
confirm.
From the drop-down list of "Video Preview", "On" and "Off" is
optional. Select the interval time of preview switching; Select "On"
or "Off" option from the "Alarm Preview" drop-down list, and
select the interval time of the preview switching in the same time.
Select the number of preview screen from "Preview Mode", and
select the channel to be displayed in the right list box.
Select "Save" after finishing setting, and then press
Ǐ
ENT
ǐ
key to
confirm.
4.4 PTZ Control
Attention:
Before attempt to perform PTZ control, make sure the
RS-422 port of the DVR is connect with the RS-422 port of the
Pan/Tilt or dome.
In PTZ control status, the below keys could perform the operations
as follows:
Ǐ
ǐ
,
Ǐ
ǐ
,
Ǐ
ǐ
and
Ǐ
ǐ
key: Control the movement
upward/downward/leftward and rightward.
Ǐ
0
ǐ̚Ǐ
9
ǐ
keys: Switch the channel or preset number, for example,
channel 1, press
Ǐ
0
ǐǏ
1
ǐ
.
Ǐ
MENU
ǐ
key: Open/Close rainwater remover.
Ǐ
PLAY
ǐ
key: Start autopan, and press any control key (direction
keys,
Ǐ
PTZ
ǐ
,
Ǐ
WIDE
ǐ
,
Ǐ
TELE
ǐ
,
Ǐ
MENU
ǐ
,
Ǐ
IRIS+
ǐ
,
Ǐ
IRIS-
ǐ
,
Ǐ⬄ǐ
,
Ǐ
*
ǐ
) to stop autopan.
Ǐ
PRST
ǐ
key: Call up preset. Input 3 digits number combination
keys after pressing this key to call up preset. For example, press
Ǐ
PRST
ǐ
+
Ǐ
0
ǐǏ
0
ǐǏ
1
ǐ
key combination to call up preset 1.
Ǐ
WIDE
ǐ
and
Ǐ
TELE
ǐ
key: Zoom in/out
Ǐ⬄ǐ
and
Ǐ
*
ǐ
key: Control focus
Ǐ
IRIS+
ǐ
and
Ǐ
IRIS-
ǐ
: Control iris
Make a quick double click on
Ǐ
ǐ
key to speed down or on
Ǐ
ǐ
