48
Item
Function
A
USER NUM
Selects the user to configure.
To select a user,
1)
Move the cursor to the entry;
2)
Enter the desired user number (1-64) on the numeric keypad;
3)
Press the ACK key to select.
Item
Function
B
PRIORITY LEVEL
Assign an appropriate priority level to the selected user.
To define the priority level,
1)
Move the cursor to the entry;
2)
Enter the priority level number (1-8) on the numeric keypad;
3)
Press the ACK key to confirm.
Note
z
Level 8 (default) is the highest level, and Level 1 is the lowest.
z
A higher level can inherit the functions permitted for its lower levels.
Item
Function
C
PASSWORD
Assigns a password to the user.
To define a password,
1)
Move the cursor to the entry;
2)
Enter the password (a maximum of six digits) on the numeric keypad;
3)
Press the ACK key to confirm. You will be prompted to verify the password by a
"
VERIFY PASSWORD
" message;
4)
Re-enter the same password as in Step 3;
5)
Press the ACK key to confirm. If the code is not verified, the message
"
**ERROR - REENTER PASSWORD
" will be displayed, and Steps 1 through 4 must be
repeated until successful verification.
5.8.4 Set Priority
PRIORITY
1 USER IDENTIFICATION
2 SET USER
3 SET PRIORITY
RETURN MAIN
SET PRIORITY
LEVEL 1
ADD USER Y
SYSTEM RESET Y
LOCK CAM ABILITY Y
UTILIZE V/C ACCESS
MENU ACCESS Y
CHANGE PARAMETERS Y
PREVIOUS MENU
A
B
C
D
E
F
G
The SET PRIORITY menu (shown left) is used to configure each of
the eight priority levels. Upon initial setup, all the eight levels are
defaulted with the same configurations.
Item
Function
A
LEVEL
Selects the level to configure.
To select a level,
1)
Move the cursor to the entry;
2)
Enter the desired level number (1-8) on the numeric keypad;
3)
Press the ACK key to select.
Item
Function
B
ADD USER
Determines whether the user can add a new user into the system.
Options
z
Y = yes (to enable the user to add a new user into the system);
z
N = no (to restrict the user from adding a new user).
Use the ACK key to select.
Note
To use this function, the USER IDS must be enabled first (see
Section 5.8.1
).
