40
5.5 Camera Menu
MAIN SELECTION
1 SYSTEM
2 MONITOR
3 CAMERA
4 PORTS
5 ACCESS
6 PRIORITY
7 SATELLITE
CAMERA
1 PSEUDO
2 TITLE
RETURN MAIN
The Camera menu (shown above) is used to assign a Pseudo
(logical) number to each camera, and to create or change the
camera's title information.
5.5.1 Assign Pseudo Cameras
CAMERA
1 PSEUDO
2 TITLE
RETURN MAIN
ASSIGN PSEUDO CAMERAS
CAMERA
REAL
0001
0002
0003
0004
0005
0006
0007
0008
PSEUDO
1025
1026
1027
1028
1029
1030
1031
1032
PREVIOUS MENU
A
B
R SITE R CAM
--
--
--
--
--
--
--
--
----
----
----
----
----
----
----
----
C
D
V2040 can assign a Pseudo number (1-9999) to each of up to 1024
cameras to facilitate system management. A Pseudo number is the
logical number that the system assigns to a specific camera. By
default, each camera's Pseudo number is the same as its Real
number.
Item
Function
A
REAL
Indicates the Real number of a camera.
Item
Function
B
PSEUDO
Assigns a Pseudo number to the camera.
To change a camera's Pseudo number,
1)
Move the cursor to the entry;
2)
Enter the desired Pseudo number (1-9999) on the numeric keypad;
3)
Press the ACK key to confirm.
Note:
If Camera A's Real number is chosen as the Pseudo number for Camera B, Camera B's
real number will then be automatically assigned as the Pseudo number for Camera A.
To locate a Pseudo camera number in the menu,
1)
Enter the desired Pseudo number on the numeric keypad;
2)
Press either the CLOSE (page up) or the OPEN (page down) key in the IRIS section of the
keyboard to display the camera entry.
C
R SITE
Function
Assigns a number to the remote site.
1) Move the cursor to the entry;
2) Enter the desired remote site number (1-64) on the numeric keypad;
3) Press the ACK key to confirm.
Note:
The desired remote site number (1-64) can’t duplicate from the local site number.
Item
Function
D
R CAM
Assigns a number to the remote camera.
1) Move the cursor to the entry;
2) Enter the desired remote camera number (1-9999) on the numeric keypad;
3) Press the ACK key to confirm.
Example
If local site 1 requests image from remote site 2, setting the network pseudo and calling up it can be a solution.
MENU setup:
REAL PSEUDO
R
SITE
R
CAM
5000
02
0002
Afterward, input “1 MON 5000 CAM” on the local keyboard to request the image of CAM 2 from remote site 2.
