22
9.6. Doubles Detection
Note:
Only the 7K Plus is equipped with doubles detection
9.6.1
Optic Cable
a)
Replacement
•
Disconnect
the
power cord
from the machine.
1. Remove the
electrical side cover
.
2. Swing open the clear plastic guard on the
optic amplifier
.
3. Slide the end of the right side of the
optic amplifier
away from the machine and remove the
optical cables
from the
amplifier
.
4. Disconnect the
optical cable
from other end and replace if necessary.
b)
Installation
1. Reconnection is the reversal of removal.
2. “Teach” Optic amplifier. (See Section 9.6.4)
9.6.2
Optic Amplifier
a)
Removal
•
Disconnect
the
power cord
from the machine.
1. Remove
electrical side cover
.
2. Disconnect both
optical cables
from the
amplifier
.
3. Unclip the
optic amplifier
and remove from the
din rail
.
4. Remove the
optic amplifier
and replace with new unit if faulty or damaged.
b)
Installation
1. Installation is the reverse of removal.
2. Setup new
optic amplifier
. (See Section 9.6.2c)
3. Align the sensor. (See Section 9.6.3)
4. Teach the
optic sensor
. (See Section 9.6.4)
c)
Setup
1. With the machine powered on simultaneously press and hold the (+) and (-) buttons until [ lodo ] is displayed
on the screen.
a) Ensure the letter [ L ] is displayed in the lower left hand corner, if it is not press the (+) button once.
2. Proceed to the next step by pressing the (-) button.
a) The screen with display [ t 0 ], if the zero is not the number shown use the (+) button to scroll through
the numbers till [ t 0 ] is displayed.
3. Proceed to the next step by pressing the (-) button.
a) The light reading is displayed as a four digit number, if only a three digit number is displayed followed by
the letter [ P ] press the (+) button once so the four digit reading is displayed.
4. Proceed to the next step by pressing the (-) button.
a) Select [SHS] by pressing the (+) button until [SHS) is displayed.
5. Press the (-) button to exit the setup.
Figure 22: Optic Sensor
Содержание 7K Plus
