Infineon TLE984 Series Скачать руководство пользователя страница 116

Страница: 116 / 116

Trademarks of Infineon Technologies AG

AURIX™, C166™, CanPAK™, CIPOS™, CoolGaN™, CoolMOS™, CoolSET™, CoolSiC™, CORECONTROL™, CROSSAVE™, DAVE™, DI-POL™, DrBLADE™, EasyPIM™,

EconoBRIDGE™, EconoDUAL™, EconoPACK™, EconoPIM™, EiceDRIVER™, eupec™, FCOS™, HITFET™, HybridPACK™, Infineon™, ISOFACE™, IsoPACK™, i-

Wafer™, MIPAQ™, ModSTACK™, my-d™, NovalithIC™, OmniTune™, OPTIGA™, OptiMOS™, ORIGA™, POWERCODE™, PRIMARION™, PrimePACK™,

PrimeSTACK™, PROFET™, PRO-SIL™, RASIC™, REAL3™, ReverSave™, SatRIC™, SIEGET™, SIPMOS™, SmartLEWIS™, SOLID FLASH™, SPOC™, TEMPFET™,

thinQ!™, TRENCHSTOP™, TriCore™.

Other Trademarks

Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, KEIL™, PRIMECELL™, REALVIEW™, THUMB™, µVision™ of ARM Limited,

UK. ANSI™ of American National Standards Institute. AUTOSAR™ of AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT

Forum. CIPURSE™ of OSPT Alliance. COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™ of Epcos AG.

FLEXGO™ of Microsoft Corporation. HYPERTERMINAL™ of Hilgraeve Incorporated. MCS™ of Intel Corp. IEC™ of Commission Electrotechnique Internationale.

IrDA™ of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of

Maxim Integrated Products, Inc. MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS Technologies, Inc.,

USA. muRata™ of MURATA MANUFACTURING CO., MICROWAVE OFFICE™ (MWO) of Applied Wave Research Inc., OmniVision™ of OmniVision Technologies,

Inc. Openwave™ of Openwave Systems Inc. RED HAT™ of Red Hat, Inc. RFMD™ of RF Micro Devices, Inc. SIRIUS™ of Sirius Satellite Radio Inc. SOLARIS™ of

Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA,

Inc. TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design

Systems, Inc. VLYNQ™ of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex Limited.

Trademarks Update 2014-11-12

Edition 2019-04-24
Published by
Infineon Technologies AG
81726 Munich, Germany

Do you have a question about any

aspect of this document?
Email:

[email protected]

Document reference

Legal Disclaimer

The information given in this document shall in

no event be regarded as a guarantee of

conditions or characteristics. With respect to any

examples or hints given herein, any typical

values stated herein and/or any information

regarding the application of the device, Infineon

Technologies hereby disclaims any and all

warranties and liabilities of any kind, including

without limitation, warranties of non-

infringement of intellectual property rights of

any third party.

Information

For further information on technology, delivery

terms and conditions and prices, please contact

the nearest Infineon Technologies Office

(

www.infineon.com

Warnings

Due to technical requirements, components

may contain dangerous substances. For

information on the types in question, please

contact the nearest Infineon Technologies

Office. Infineon Technologies components may

be used in life-support devices or systems only

with the express written approval of Infineon

Technologies, if a failure of such components

can reasonably be expected to cause the failure

of that life-support device or system or to affect

the safety or effectiveness of that device or

system. Life support devices or systems are

intended to be implanted in the human body or

to support and/or maintain and sustain and/or

protect human life. If they fail, it is reasonable to

assume that the health of the user or other

persons may be endangered.

www.infineon.com

Содержание TLE984 Series





















































































































Результаты поиска

Содержание TLE984 Series

Отзывы:

Похожие инструкции для TLE984 Series

Бренды по названию

Популярные бренды

Infineon TLE984 Series, Руководство пользователя для прошивки

Результаты поиска

Содержание TLE984 Series

Отзывы:

Похожие инструкции для TLE984 Series

Бренды по названию

Популярные бренды