N 2010-03
r 2009
Application Note AN 2010-08
V2.0, August 2010
Figure 4
Technical drawing of the HybridPACK
TM
2 auxiliary terminals (pin connectors).
The picture above shows the dimension and the structure of the auxiliary terminals. Due to
the specific requirements of the JST connector the auxiliary terminals have the following
properties:
•
The auxiliary terminals are made of 63% IACS (International Annealed Copper
Standard) copper material,
•
Auxiliary terminals have gold (Au) surface with nickel (Ni) under plating,
•
The tensile strength of the auxiliary terminals has to be equal or exceed 530MPa,
