Inepro PayCon II, Техническое руководство

Страница: 30 / 144

Changing settings
23 - PayCon II
123
123 settings are numerical value fields. The value can be manually
entered on the keyboard of the PayCon. When a 123 setting is
selected the current value is displayed in black. There are several
actions possible:
1. Increase or decrease the value with the [+] and [-] buttons;
2. Key in direct a new value via the numerical keyboard;
3. Use the
[Corr] button to change the value. When the [Corr]
button has been pressed the cursor will start blinking behind the
last digit. When the
[Corr] button is pressed again this digit is
deleted.
By pressing the [Stop] button the edited value is not saved. When
the [OK] button is pressed the edited value is saved.
When a 123 setting is selected with read only rights, this
function is than read only. No changes can be made.
1.2
1.2 settings are also numerical value fields but with the main
difference that the value of these fields can contain decimal values.
How many decimals can be entered is depending on the field. How
to change the value of this field is explained in 123. Additionally to
key in the decimal point press the
[. a/A] button. An example of a
1.2 field is the maximum balance in the Card / ID menu.
IP-address
In this field the IP addresses can be entered. To key in a value is
explained in 123. The
[. a/A] button can be used to jump to the
next place of the IP address.
Time
The time field is a 24-hour clock field in the format HH:mm:ss.
Date