Inepro PayCon II, Техническое руководство

Страница: 91 / 144

How To
84
How to change the connected copier
type?
For changing the copier type you need the correct cables and
settings first. To install the cabling refer to the installation manual if
available. For the connections on the PayCon refer to the appendix
with the connection overview.
To set up the special settings enter the menu as
described in
the Introduction chapter of this
manual with your Service card and go to the copier
submenu.
Create the appropriate settings; this depends on
the type of copier. Please refer to the partner zone
of the Inepro web site for the most actual
information regarding copier settings.
In Appendix IV we will describe the functionality
of some of the most fundamental interfaces.
How to adjust the contrast / back light
Every LCD display on the PayCon or PayCompact has got its own
contrast and back light adjustment. They can be all adjusted via the
PayCon menu. Enter the menu as described in
the Introduction
chapter of this manual with your Administrator or Service card.
Take the following steps to adjust the display settings:
19
119
19