Inepro PayCon II, Техническое руководство

Страница: 54 / 144

Hardware
47 - PayCon II
LEGIC (Old )
Option Description
COM port The COM port the card is connected to
Cardswitch Does the card need to be phy sically released at the end of the transaction?
LED The port the LED is powered f rom
Coins
In this menu you can enable and setup the connected coin selector
(like in the PayMatic). If the coin selector is enabled in the menu you
can use the coin selector, and also the values of the coins will be
shown in the PayCon display during standby.
You can also set up the coin pre-select values in this menu, up to 6
different channels. When the coin selector accepts more then 6
coins (2 coins on 1 channel) you can set up so called extra items
they will be shown in the PayCon display together with the coin
values.
If you don't set the name and position correctly you might
experience strange display messages.
Banknotes
In this menu you can set up the connected banknote reader.
Notice that the banknote reader needs a RS232 COM port.
Finally you should set up the correct values from the banknotes in
the right order; this depends on the configuration of the banknote
reader. The PayCon accepts only filled out banknotes, these values
will be shown in the PayCon display during standby.
In case of a communication failure between the banknote reader and
the PayCon the values of the banknotes are not shown in the
PayCon display.