Industrial Scientific V-CAL, Руководство по эксплуатации продукта

Страница: 25 / 48

Product Manual for the Six-Unit Calibration Station for Ventis™
© 2010, 2016 Industrial Scientific Corporation 25
Check V

Cal
Cradle Solenoid X
Or
X-Check Solenoid
Displays to indicate when any solenoid is
not operating properly. The red LED and
the display indicate which cradle numbers
are affected.
Contact factory.

Bump test and calibration
functions are
not
available for
the affected cradles.

Set-up mode is accessible.

USB communications are
accepted and processed.
Check
V

Cal Board
Displays to indicate the board current falls
outside the acceptable limits (or may
indicate an oscillator or A/D failure). All six
red LEDs turn on.
Contact factory.

Bump test and calibration
functions are
not
available.

Set-up mode is accessible.

USB communications are
accepted and processed.
V

Cal Memory
Error
Displays to indicate the station cannot
read from or write to its memory. All six
red LEDs turn on.
Contact factory.

The bump test and calibrate
functions are not available.

Set-up mode is accessible.

USB communications are
accepted and processed.
V

Cal Clock
Error
Indicates an invalid date or clock setting
on the station’s real-time clock. All six red
LEDs turn on.
The user can enter set-up mode
and attempt to re-set the date and
time. (See the manual section, Set-
up Mode.)

Bump test and calibration
functions are not available.

Set-up mode is accessible.

USB communications are
accepted and processed.