Industrial Scientific V-CAL, Руководство по эксплуатации продукта

Страница: 19 / 48

Product Manual for the Six-Unit Calibration Station for Ventis™
© 2010, 2016 Industrial Scientific Corporation 19
Figure 1 lists the information contained in reports that are generated from the
printing procedures described above: printing instrument events and printing
V

Cal Records (calibration and bump test reports).
Report information generated from set-up mode functions.
Print Instrument Events
Print V

Cal Records

Industrial Scientific Corp.

Name of calibration station and its
software version

Date of printout

Instrument serial number

Instrument software version

Instrument hardware version

For each alarm event:
o
Sensor type
o
Sensor serial number
o
Sensor high alarm threshold
o
Sensor low alarm threshold
o
Peak gas exposure value
during alarm
o
Duration of alarm event in
seconds
o
Time and date the alarm
occurred
o
Instrument user setting
o
Instrument site setting

A blank for the user’s signature

A blank for the user to enter the
date

A blank for the user to enter the
time

Industrial Scientific Corp.

Name of calibration station and its
software version

Date and time of calibration (or
bump test)

Instrument serial number

Instrument software version

Instrument hardware version

Instrument zero, calibration, or
bump test result (pass or fail)

Recommended date for next
calibration (shown for calibration
only; date is blank for a failed
calibration)

For each sensor:
o
Sensor type
o
Span reserve (for calibration)
or Final bump test reading (for
bump test)
o
Calibration gas concentration
o
High alarm threshold
o
Low alarm threshold
o
Zero, calibration, or bump test
results

A blank for the user to enter the
cylinder lot number

A blank for the user’s signature
Figure 1a.
Event report.
Figure 1b.
Calibration and bump test reports.
###