Indmar Premium 400 Скачать руководство пользователя страница 17

Страница: 17 / 124

1-1

Section One

SAFETY

The words DANGER, WARNING, CAUTION and NOTICE are
used throughout this manual to highlight important information.
Be certain that the meanings of these alerts are known to all who
work on or near the equipment.

Follow the safety information throughout this manual in addition to
the safety policies and procedures of your employer.

This safety alert symbol appears with most safety

statements. It means attention, become alert, your safety is
involved! Please read and abide by the message that follows
the safety alert symbol.

DANGER

Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.

NOTICE

Indicates a situation which can cause damage to the engine,
personal property and/or the environment, or cause the equipment
to operate improperly.

OTE:

Indicates a procedure, practice or condition that should be
followed in order for the engine or component to function
in the manner intended.

Содержание Premium 400





























































































































Результаты поиска

Содержание Premium 400

Отзывы:

Indmar Premium 400, Руководство оператора, Страница: 17 / 124

Результаты поиска

Содержание Premium 400

Отзывы: