Indmar Premium 400 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 124

Indmar Premium 400 Скачать руководство пользователя страница 14

xii

Any emission warranty part repaired or replaced under the
terms of this warranty statement is warranted by Indmar for the
remainder of the warranty period of the original part. All parts
replaced under this limited warranty become the property of
Indmar.

If the ownership of a product is transferred during Emission
Components Warranty period, this warranty shall also be
transferred and be valid for the remaining coverage period
provided that Indmar is notiﬁed in the following way:

a.

The former owner contacts Indmar and provides us with the
required information listed below; or

b.

Indmar receives a proof that the former owner agreed to the
transfer of ownership and we are provided with the information
listed below.

-

Current owner’s name, address, telephone, engine serial
number and date of purchase

-

New owner’s name, address, telephone, engine serial
number and date of transfer

Send the above information to:

Indmar Products
5400 Old Millington Rd
Millington, TN 38053
Attn: Emission Warranty Transfer

NOTICE

The above procedure is valid for the transfer of the Emission
Components warranty only. Refer to the Limited Warranty in
Appendix C of this manual for information regarding warranty
transfer of the remaining engine components.

«
...
12
13
14
15
16
...
»

Содержание Premium 400





























































































































Отзывы:

Нет отзывов