4
1.06 MODIFICATIONS AND ENCLOSURES OF THE INSTRUCTIONS MANUAL
This manual reflects the state at the time of the launch of the machine on its market. If any modifications, improvements
or adjustments have been made since machine supply the Manufacturer does not have to intervene on the marketed
machine and will not consider the machine or the manual deficient or inadequate.
1.07 CONSTRUCTOR IDENTIFICATION
1.08 MACHINE IDENTIFICATION DATA
MODEL: C369N
PRODUCTION DATA: see EC declaration
INSTRUCTIONS MANUAL CODE : C369N.M01.EN.03
1.09 EC STAMP
SEE EC DECLARATION
1.10
USAGE
The ultrasonic tester is used to detect the presence of faults, gaps, cracks, fissures, etc. in situ on concrete structures
(or rocks or other similar manufactures) and to check stresses on them due to environmental conditions.
This appliance is for the exclusive use which it has been conceived for.
Any other use is considered improper and therefore negligent.
Machine use is allowed only in places free from danger of explosion or fire.
During operation check for conditions of danger.
immediately stop the machine should it be working irregularly, and consult the authorised dealer’s Sales Service
department.
It is the Client’s responsibility to verify at the time of installation and use that no conditions of use arise which are
different to those indicated.
Refer to the Constructor when in doubt.
1.11
OPERATORS
WARNING
DANGER
The use, transportation, installation, maintenance, demolition and
disposal of the appliance are only permitted to “QUALIFIED
PERSONNEL”.
This manual is exclusively aimed at “QUALIFIED PERSONNEL” and
contains the necessary information for machine use.
”
QUALIFIED PERSONNEL” means people who, due to their training, experience and education, as well as knowledge
of the relevant standards, limitations and measures, have been authorised by the “PLANT SAFETY MANAGER” to carry
out any necessary activity and are able to recognise and avoid any possible danger.
The manufacturer recommends that the instructions, procedures and recommendations in this manual and the work
safety legislation in force be scrupulously adhered to, even with the use of appropriate protection devices (whether
individual or part of the machine).
www.impact-test.co.uk
www.impact-test.com
www.impact-testsets.co.uk