26
INS
TALLER
U
SER
M
AINTEN
AN
CE
TECHNI
CI
AN
TECHNI
CAL
D
AT
A
1.16 CONCENTRIC VERTICAL KIT
INSTALLATION
Type C configuration, sealed chamber and fan assisted
Concentric vertical intake and exhaust kit.
This vertical terminal is connected directly to the outside of the
building for air intake and flue gas exhaust.
The vertical kit with aluminium tile enables installation
on terraces and roofs with a maximum slope of 45% (ap-
prox. 25°) and the height between the terminal cap and
half-shell (374 mm for Ø 60/100 and 260 mm for
Ø 80/125) must always be observed.
Mounting the vertical kit with aluminium tile
Ø 60/100 (Fig. 22)
1. Install the concentric flange (2) on the central hole of the boi-
ler, positioning gasket (1) with the circular projections
downwards in contact with the boiler flange.
2. Tighten the concentric flange with the screws in the kit.
3. Replace the tiles with the aluminium sheet (4), shaping it to
ensure that rainwater runs off.
4. Position the fixed half-shell (6) on the aluminium tile.
5. Insert the intake-exhaust pipe (5).
6. Fit the Ø 60/100 concentric terminal pipe with the male side
(5) (smooth) into the flange (2) up to the end stop, making sure
that the wall sealing plate has been fitted (3); this will ensure
sealing and joining of the elements making up the kit.
When the boiler is installed in areas where very cold
temperatures can be reached, a special anti-freeze kit is
available that can be installed as an alternative to the
standard kit.
C32
7
4
6
5
1
2
3
22
The kit includes (Fig. 22):
No.1 Gasket (1)
No.1 Female concentric flange (2)
No.1 Wall sealing plate (3)
No.1 Aluminium tile (4)
No.1 Intake/exhaust concentric pipe Ø 60/100 (5)
No.1 Fixed half-shell (6)
No.1 Mobile half-shell (7)
Extensions for Ø 60/100 vertical kit (Fig. 23)
The kit with this configuration can be extended to a max. straight
vertical length of 4.3 m, including the terminal.
This configuration corresponds to a resistance factor of 100.
In this case the special extensions must be requested.
C32
1
23
Key (Fig. C3223):
1 - Maximum length
