IMDES CREATIVE SOLUTIONS Schulstrasse 21 D-48455 Bad Bentheim /Gildehaus Germany T:+49(0)5924-997337 E:
© 2019
IMDES CREATIVE SOLUTIONS
13
Chose a solid (working) table top with good lighting conditions and near a window which can be opened for
optimal ventilation, because heated solder paste will create pungent fumes.
The 4 rubber feet under the unit aid in exchange of air underneath the
DINO-CONDENS-
IT
.
1.13.3 The stainless steel lid with glass observation window
GALDEN is an expensive liquid, and hence we have optimized the
DINO-CONDENS-
IT
to have the lowest
possible evaporation loss.
This includes also proper handling!
-Open the lid only after the blower has been stopped after the cooling stage.
-Opening the
DINO-CONDENS-
IT
at reflow temperature will increase the loss of GALDEN, as GALDEN steam
could escape from the chamber.
The lid is made of a stainless steel and has an integrated heat resistance glass window (up to 700 °C =1292 °F) to
observe the reflow process.
