IMC Networks iMcV-FiberLinX-II, Руководство по эксплуатации

Страница: 34 / 60

VIII - Application Examples
The following are application examples of the different VLAN configuration modes
available using the iMcV-FiberLinX-II. If you require assistance configuring an
application, contact IMC Networks Technical Support at
techsupport@imcnetworks.com.
The application modes include the following:
•
Default
•
Transparent with Untagged Management
•
Transparent with Tagged Management
•
Transparent with Extra Tagging (Q-in-Q)
•
Port VLAN
•
Port VLAN Filter
NOTE
When configuring VLAN IDs, remember that you can use any VLAN ID between 1
and 4,094. The VLAN IDs used in the following applications are for example
purposes ONLY.
Default
Default mode passes only untagged data between the DATA port and the OPTICS (or
UPLINK) port. This mode is the factory default and is provided as a starting point
from which to configure the iMcV-FiberLinX-II modules. It is not intended as a mode
for normal use.
NOTE
Default Mode does not provide any management traffic protection and is not
recommended for normal use.
Transparent with Untagged Management
Transparent with Untagged Management mode passes tagged traffic between the
DATA port and the OPTICS (or UPLINK) port and isolates untagged traffic as
management domain traffic (untagged).
To configure this mode, do the following:
1. Set the management DIP switch ON for the ports using management (in this
example it is the OPTICS (or UPLINK) port: 3 = ON). To enable External
34