Basic Device Configuration
After running through an initial self test, the screen will display the following message:
“Press <Enter> for Device Configuration.” Press Enter open the main configuration
screen:
Saved Values. <These values will be active after reboot>
IP Address -
10.10.10.10
DHCP is not active
Subnet Mask -
255.0.0.0
Default Gateway -
000.000.000.000
000.000.000.000
Server IP Addr -
New Prom File -
filename
n use now>
Current Values. <These values are i
10
IP Address -
10.10.10.
Subnet Mask -
255.0.0.0
Default Gateway -
000.000.000.000
000.000.000.000
Server IP Addr -
New Prom File -
filename
mmunity String:
public
Access:
r/w
Co
Press
I
to enter new saved parameter values. Press
P
to change Password.
Press
T
to enter new Trap Destination. Press
K
to remove
ALL
Trap Destinations.
s.
Press
C
to enter new Community String. Press
U
to remove
ALL
Community String
boot unit. Press
D
for
DHCP
On/Off.
Press
E
to End session. Type
REBOOT
to re
Press
SpaceBar
for additional commands.
This screen contains the following information and options:
Saved and Current Values
Saved values display the changes made during the current session and current values
display the values currently in use:
•
IP Address (IP address of SNMP agent)
•
Subnet Mask (mask to define IP subnet to which agent is connected)
•
Default Gateway (default router for IP traffic outside of the subnet)
•
Server IP Address (TFTP server)
•
New Prom File (TFTP new file name)
Command List
I = Allows you to enter new Saved Parameter Values
P = Allows you to change the Password*
T = Allows you to enter new Trap Destinations
K = Allows you to remove All Trap Destinations
C = Allows you to create SNMP Community Strings
U = Allows you to delete All SNMP Community Strings
E = Allows you to End the session*
REBOOT = Allows you to Reboot the unit (may result in short data loss)
D = Allows you to enable or disable DHCP
Space Bar = Opens the device specific configuration options screen.
18
Содержание iMcV-FiberLinX-II
Страница 1: ...iMcV FiberLinX II Operation Manual...
Страница 55: ...Link Fault Pass Through 55...
Страница 58: ...Notes 58...
