SNMP. As a Remote unit, the iMcV-FiberLinX-II will respond to requests for
management information from an attached Host unit.
The iMcV-FiberLinX-II default configuration is as a Standalone unit (DIP switches 7
and 8 = Off).
Management
Although the iMcV-FiberLinX-II provides a twisted pair port solely for management
(EXT MGMT), you can configure iMcV-FiberLinX-II to accept IP-based management
traffic from any of its three ports. You can enable management on more than one
port, or you can disable management on all of the ports, if desired. These switches
limit only IP-based management. Host-to- Remote management is IP-less and is
never blocked from the fiber port. Serial port management of the unit is always
available on the EXT MGMT port regardless of the DIP switch settings.
In addition to defining which ports are used to manage the iMcV-FiberLinX-II units,
the management DIP switch settings also define what ports the flow of the Network
Provider’s Management Domain traffic can take through the unit. See Application
Examples for information regarding the Management Domain.
DIP switch 1 = On for management on the EXT MGMT port.
DIP switch 2 = On for management on the DATA port.
DIP switch 3 = On for management on the OPTICS or UPLINK port.
11
Содержание iMcV-FiberLinX-II
Страница 1: ...iMcV FiberLinX II Operation Manual...
Страница 55: ...Link Fault Pass Through 55...
Страница 58: ...Notes 58...