Nexio® NLE Gateway
Chapter 4
Installation Guide
Installing the Mac NLE Client
Plug-ins
© 2014 Imagine Communications Corp.
Proprietary and Confidential.
November 2014 | Page 39
Installing the Mac NLE Client Plug-ins
You must install the Mac NLE client plug-in software onto each of your Mac NLE client workstations.
Note.
The LLM and CIFServer applications must be running properly on the before you can successfully
connect a client workstation to the Nexio NLE gateway server.
Connecting the Client Workstation to the NLE
Gateway
Here is a summary list of tasks you will perform to connect your Mac client workstation to the Nexio NLE
gateway device:
Use the
Connect to Server
window on your Mac to identify address of your server on the network.
Use the
System Authentication
window to enter your login credentials for the Nexio server system.
Connecting to the Gateway Server
1.
From the
Apple Go
menu select
Connect to Server
. (You can also use the
Apple Key + K
shortcut.)
Type your server address using this format:
cifs://[the IP address of your NLE Gateway]/[name of your CIFShare]
OR use the Name Service share name
cifs://[NAME]/[SHARE]
For Example: if the IP address of your CIFServer is 172.16.248.20 and your name service name is
NEXIO1, then you will enter the address as follows:
cifs://172.16.248.20/NEXIO1
Chapter 4