
Nexio® NLE Gateway
Chapter 3
Installation Guide
Configuring the NLE Gateway Software
© 2014 Imagine Communications Corp.
Proprietary and Confidential.
November 2014 | Page 32
Configuring the NLE Gateway
Software
Installing the LLM and CIFServer Application
Both the LLM and CIFServer are distributed as part of the Nexio Software Release package.
1.
Download the latest Nexio Software Release package. If you cannot upgrade your system to the
latest Nexio Software Release due to compatibility issues, you must use at least version 6.7.1. or
higher. See the next section on updating CIFServer to get the proper version installed for the NLE
Gateway.
Note:
Refer to the Nexio 7.x Software Installation Guide for more information
2.
Run Nexio Setup and select
NX1011FCP
as the platform type.
3.
Choose the applicable storage type.
4.
Accept the default selections and click
Install Selected Applications
.
5.
Reboot when prompted.
Updating the CIFServer Application
The CIFServer version supplied with the Nexio Software Installation may need to be upgraded. Three
versions of CIFServer are supported with the NLE Gateway:
Version 2.2.25 or higher must be used with Nexio 6.7.1
Version 2.3.11 or higher must be used with Nexio 7.x
To Install the CIFServer
1.
Download the proper version of the CIFServer application.
2.
Copy the
CIFServer.exe
file locally, and place in the
C:\VR
folder.
3.
Accept overwriting the file.
Confirm Registry Settings
Make sure the following registry value is set correctly for the CIFServer versions listed here:
[HKEY_CURRENT_USER\Software\Harris\CIFServer\Settings]
For CIFServer 2.2.26; set the registry value to "
DBConnection"="DSN=nxdb;"
For CIFServer 2.3.11; set the registry value to "
DBConnection"="DSN=nxdb64;"
Chapter 3