
Nexio® NLE Gateway
Chapter 2
Installation Guide
Configuring
the NLE Gateway Hardware
© 2014 Imagine Communications Corp.
Proprietary and Confidential.
November 2014 | Page 30
2.
Right-click
Local Area Connection
and select
Properties
.
3.
From the
General
tab, select
Internet Protocol (TCP/IP)
, then click
Properties
.
4.
Select U
se the following IP address
and enter the IP address and Subnet mask. Click
OK
.
Configuring Farad Storage
If your system uses Nexio Farad servers for storage and Jumbo Frames are enabled, you must follow this
procedure to change the Ethernet Mtu property for port 0 and port 1.