Imagine Nexio AMP NX3601 HDX, Руководство по установке оборудования и инструкция пользователя

Страница: 30 / 56

Chapter 3
Getting Started
30
Startup Operations
Once NEXIO AMP is successfully started, complete the following startup operations to
ensure the NEXIO AMP is operating properly:

Registering Your Software on page 30

Confirming Connection to Additional Systems on page 33

Verifying Audio and Video I/O Connections on page 33

Testing Input and Output Signals on page 34
Registering Your
Software
Your software must be registered. Typically this gets done during the commissioning
process. If your software does not get registered during the commissioning process, you
can register your software. To register your software you will need to send Harris BCD
Support the deployment file (.dc file) for the software. The .dc file is a unique encrypted file
for each server. Therefore you must make sure that you name each server with a unique
name for easy identification.
The following procedure describes how to create the deployment (.dc) file that you need to
send to Harris BCD Support. This information can also be found on the
Software
Registration Card provided with your server.
If you have any questions about registering your software, contact BCD Technical Support
(see
Technical Support on page 6).
To create the deployment (.dc) file
1 Navigate to the C:\Program Files (x86)\Harris\SLK folder.
Figure 3-3 SLK Folder
2 Double-click RM.exe to open the Registration Manager.
Tip You can also click Start > Programs > Harris > Software License Key > Registration Manager
to open the Registration Manager.
If you are using NEXIO Software Release 5.7.1 or earlier, the Registration Manager is
located at C:\VR\SLK.