Imagine Nexio AMP NX3601 HDX, Руководство по установке оборудования и инструкция пользователя

Страница: 23 / 56

NEXIO AMP
Hardware Installation and User Guide
23

Protocol can be used via any Ethernet port. Ethernet ports 3 and 4 can be teamed for
port redundancy. Do not team Ethernet ports 3 and 4 if they are used in servers with
the low resolution proxy (PRXEncoder) application.

If Media Most architecture is used, no FTP support is allowed using any Ethernet port.
If you are using FTP services:
1 In NEXIO Config , click the IP Config tab (see page 74 ).
2 In the Role list, select FTP LAN for the appropriate Ethernet connection (typically Ethernet 3 or
Ethernet 4).
GPI Ports
The NEXIO AMP provides 4 GPI connectors.

GPI IN 1-16

GPI IN 17-32

GPI OUT 1-8

GPI OUT 9-16
GPI IN — There are two GPI IN connectors. Each GPI IN connector manages 16 GPI input
triggers. Inputs can be used to trigger playlist functions such as play, stop, and record of
each channel.
GPI OUT — There are two GPI OUT connectors. Each GPI OUT connector manages 8 GPI
output triggers. Outputs can be programmed to trigger certain events in the Playlist and to
indicate a RAIDset error.
COM Ports
There are eight ports designated for RS-422 communications. They can all be used to
control channels on the server. COM port 7 or 8 can be used to connect a VTR.
COM ports 1 - 8 can be configured to control various channels (see Table 2-3 ). Each COM
port can control only one channel. The COM ports are codec based, therefore codec 0 =
channel 1, etc. For more information on configuring COM ports, see
NEXIO AMP RS-422
Pinouts on page 46.
Table 2-3 Default COM Port Channel Configurations
Mode COM Port Codecs
2 channel mode COM Port 1 and 2 Codec 0 and 1 (channel 1 and 2)
3 channel mode COM Port 1, 2, and 3 Codec 0, 1, and 2 (channel 1, 2,
and 3)
4 channel mode COM Port 1, 2, 3, and
4
Codec 0, 1, 2, and 3 (channel 1, 2, 3,
and 4)
6 channel mode COM Port 1, 2, 3, 4, 5,
and 6
Codec 0, 1, 2, 3, 4, and 5 (channel 1,
2, 3, 4, 5, and 6)
8 channel mode COM Port 1, 2, 3, 4, 5,
6, 7, and 8
Codec 0, 1, 2, 3, 4, 5, 6, and 7
(channel 1, 2, 3, 4, 5, 6, 7, and 8)