background image

Dseries Harris J/S (JSC-2) Jog-Shuttle Control Panel  
Reference 

 

Operation 

 

 

The Jog sensitivity of the JSC-2 panel is approximately 3 frames per full 
revolution- to be in line with other D-Series panels. 

Button Mapping 

The following tables outline button mapping and functionality for the JSC-2 when 
used wit

DALstation

 or when used wit

DALingest

 

DALstation Functionality 

Button    
Description 

Previous 
Keycap 
Engraving 

DALstation Functionality 

Leftmost 
Button, Top 
Row 

SOURCE 

If either the Ad Hoc Ingest Window is open with 
the DEST button lit on the panel, or the VCP 
Window is active with the SOURCE button lit, 
control of the source machine for the cursor 
event’s main source or on-air source for the bus is 
provided. 

Reconfigurable

? No. 

Rightmost 
Button, Top 
Row 

DEST 

When the Ad Hoc Ingest Window is open, control 
of the record bus monitoring machine for the 
current bus is provided. In addition, the 
Jog/Shuttle Panel always controls the assigned 
bus machine for record buses while the Ad Hoc 
Ingest Window is not open 

Reconfigurable

? No. 

First Button, 
Second Row 

HOLD 

If a recording is in progress, the countdown on the 
current recording is paused (effectively extending 
the on-air event’s duration)  

Reconfigurable

? Yes. 

Second 
Button, 
Second Row 

TAKE 

If the next event is scheduled, start the next 
recording. 

Reconfigurable

? Yes. 

Third 
Button, 
Second Row 

END 

If a recording is in progress, prematurely end the 
current recording. 

Reconfigurable

? Yes. 

Fourth 
Button, 
Second Row 

DELETE 

While waiting for confirmation or 
acknowledgement with the VCP Window inactive, 
rejection of a completed recording is initiated 
(“OK” acknowledgement required to complete 
deletion) or the “Reject Recording” dialog box is 
cancelled 

Reconfigurable

? No. 

Fifth Button, 
Second Row 

ACCEPT 

While waiting for confirmation or 
acknowledgement with the VCP Window inactive, 
acceptance of a completed recording is initiated 
(“OK” acknowledgement required to complete 

 

© 2014 Imagine Communications Corp.     Proprietary and Confidential 

 9-April-2014  | Page 11 of 21 

Содержание 502072-00






















Отзывы: