Imagine communications 502072-00, Справочник, Страница: 18 / 21

Dseries Harris J/S (JSC-2) Jog-Shuttle Control Panel
Reference
Configuration
Configuration
DALstation Configuration
To configure DALstation to use the JSC-2 panel, one of the following lines must
appear in the [Panel Configuration] section of the DALstation.ini configuration file:
Ingest Jog Shuttle Control Panel=" INGEST-JSC-2,COMX"
Where “COMX” denotes the serial port used to communicate with the device.
DALingest Configuration
Configuration of the JSC-2 panel is automatically performed and does not require any
in-put by the operator. Configurations of other panels connected via serial connection
(e.g. the DAL Jog/Shuttle Control Panel) are stored across sessions in the
DALingest.INI file.
Cabling Pinouts
A single JSC-2 Panel may be configured for use with DALstation or DALingest. The
JSC-2 connects using RS-422 serial communications.
JSC-2 Jog wheel interface RS422 Pin Configuration
DB9M pinouts (from the device perspective) are:
DB9M Function
Pin 1 GND
Pin 2 TX -
Pin 3 RX +
Pin 7 TX +
Pin 8 RX -
SER-4 - RJ45 to DB9F Converter
The following SER-4 card RJ45 to DB9F Converter pinouts are tested and working:
RJ-45 Function DB9F Function
Pin 1 TX + Pin 3 RX +
© 2014 Imagine Communications Corp. Proprietary and Confidential 9-April-2014 | Page 18 of 21