Imagine communications 502072-00, Справочник

Страница: 10 / 21

Dseries Harris J/S (JSC-2) Jog-Shuttle Control Panel
Reference
Operation
Buttons without a Lamp State
The following buttons do not have Lamp States:

Machine Control buttons: Do not have Lamp States, so do not show transport
status.

Source and Dest buttons: Do not have Lamp States. Their states are indicated in
the LCD display.
The left and rightmost character of the LCD display show an ‘*’ character to
indicate the current mode selection.
The ‘*’ character is displayed in the LCD position nearest to the button
associated with the current selection (leftmost for Source selected, rightmost
for Destination).
Timecode Display
The 16 character LCD screen (located between the Source and Dest buttons) will
display timecode and transport status for the currently selected device. The first five
(5) characters of this displays
the following symbols for transport status:
[] - Stop
|| - Pause
> - Play
>> - Forward
<< - Reverse
Note : Firmware version v2.14 or higher is required to use the Timecode display.
Firmware versions prior to v2.14 do not support jog/shuttle querying and the LCD
display will appear to become unresponsive if left idle or in the ‘shuttle’ position for a
period of time. Moving the shuttle wheel or pressing any button on the control panel
will re-update the display.
Jog/Shuttle Wheel
The wheel mechanism behaves in a similar manner to the Sony wheel found on the
DAL panels, except that while in shuttle mode, the wheel is spring-loaded.

Depression of the wheel sets the panel in ‘jog’ mode.

Releasing the wheel changes the mode to shuttling.
Direction Indicator
The red arrow indicator lamps situated above the jog/shuttle wheel identifies the
direction the wheel is turned.

Jog messages can be received at a rate of approximately fifty messages per
second.

The range of shuttle positioning is approxi/- 15.
© 2014 Imagine Communications Corp. Proprietary and Confidential 9-April-2014 | Page 10 of 21