Additional information
Image Engineering
UCM Universal Camera Mount
Seite
9
von
9
3 ADDITIONAL INFORMATION
3.1 Disposal instructions
After the service life of UCM, it must be disposed of properly. Observe your national regulations.
Make sure that UCM cannot be used by third parties after disposing of it.
Contact Image Engineering if assistance for disposal is required.
4 TECHNICAL DATA SHEET
The technical data sheet can be downloaded at the website of Image Engineering as well:
Overview
Product name
UCM
– Universal Camera Mount
Principle
Camera alignment system based on a linear guidance in combination with a
cross focusing rack and ball head
Features
DUT positioning device
Travel distance X-axis
280mm
Travel distance Y-axis
approx. 260mm, depending on setup
Travel distance Z-axis
220mm
General description hardware
Dimension [W x H x D]
240mm x 405mm (max.) x 350mm
Weight
3.4kg
Scope of delivery
Universal Camera Mount, Novoflex Ball 19P ball head, Novoflex coupling plate
QPL1, Novoflex QPL Slim VERTIKAL, black molleton, manual
Temperature range
-30°C up to 120°C
Requirements on device under test (DUT)
Max. DUT weight
0,5kg