Getting started
Image Engineering
UCM Universal Camera Mount
Seite
7
von
9
Figure 4: screws for additional Y-axis adjustment
The marked screws in Figure 4 allow for additional adjustment range on the Y-axis. Simply
loosen both screws until you can slide the whole cross focusing rack up or down the profile.
After reaching the desired position, tighten the screws again.
2.2.4 Camera positioning (Z-axis)
Figure 5: positioning of the Z-slide, height-adjustable feet
Loosen thumb screw (Figure 5, marker 1) and move the Z-slide to the desired position. Then,
tighten the thumb screw down again to secure the Z-slide against accidental movement.