Getting started
Image Engineering
UCM Universal Camera Mount
Seite
6
von
9
2.2.2 UCM operating elements
Cross focusing rack:
Figure 3: operating elements on the cross focusing rack
2.2.3 Camera positioning (X- and Y-axes)
Fix the quick release plate to the DUT, place it in the quick release clamp and tighten it down
using knob 1 (Figure 3). To position the slide, make sure knob 2 (Figure 3) is loosened, then
turn knob 3 (Figure 3) to move the slide. After reaching the desired position, tighten knob 2
down again to secure the slide against accidental movement.
Repeat process for remaining slide.
