Illinois Tool Works IJ300, Руководство по эксплуатации

Страница: 97 / 125

Controller
Appendix D: Performance Parameters
5760-121 Operations Manual Rev B Page 87 of 115
Appendix D: Performance Parameters
Performance Parameters of an Impulse Jet Controller
The performance of an Impulse Jet controller is limited by the DPI setting and the sum of
the maximum field stacks on each side of a message. The maximum field stack for a side is
defined as the maximum number of vertically aligned fields. In the following example,
Task1:Side1 has a maximum field stack of three fields and Task1:Side2 has a maximum
field stack of two fields. Thus, the sum of the maximum field stacks for Task1 is five fields.
(Task1:Side1) + (Task1:Side2) = 3 + 2 = 5 fields
If Task1 and Task2 are printing this same message, the sum of the maximum field stacks of
Task1 and Task2 is ten fields. Thus, the maximum field stack the controller has to process
is ten fields.
(Task1) + (Task2) = 5 + 5 = 10 fields
The following table can be used to determine the maximum line speed of a controller given
a maximum field stack and dpi.
The absolute maximum line speed for an IJ768 print head on a Task is 200 ft/min.
The absolute maximum line speed for one, two, or three Impulse Jet print heads on a Task
is 400 ft/min, 300 ft/min, and 200 ft/min, respectively.
Maximum Field
Stack of Controller
Max. Line Speed @
100 dpi (ft/min)
Max. Line Speed @
150 dpi (ft/min)
Max. Line Speed @
200 dpi (ft/min)
10 or less 400 267 200
11 363 242 181
12 333 222 166
13 307 205 153
14 285 190 142
15 166 177 133
16 250 166 125
17 235 156 117
18 222 148 111
19 210 140 105
20 200 133 100
Task1:Side1
Task1:Side2