Illinois Tool Works IJ300, Руководство по эксплуатации

Страница: 60 / 125

Controller
Section 6: Message Functions
Page 50 of 115 5760-121 Operations Manual Rev B
• Touch the OK button to close the
dialog box and insert the variable
field into the print message. Vari-
able fields are represented on the
Edit Screen by a string of Xs. If
the field is not exactly where it
should be, use the arrow keys to
adjust its position. Press Enter
when the field is at the desired
location.
Adding a logo: To add a logo to the
print message, move the crosshairs
pointer to the desired location and touch
the
Logo button; the Insert Logo dialog
box is displayed.
Use the up/down arrows to select a
logo. Touch the
OK button to close the
dialog box and insert the logo in the
print message.
If the logo is not exactly where it
should be, use the arrow keys to
reposition it. Press
Enter when the
logo is at the desired location.
Adding a bar code: (Impulse Jet only.) To
add a bar to the print message, move the
crosshairs pointer to the desired location
and touch the
Bar Code button; the Insert
Bar Code dialog box is displayed.
•
Touch the Bar Code Type control to
display a list of available bar code
types and make a selection.
• Select the bar code magnification fac-
tor.
• Enter the bar code data. Except for
Code 3 of 9, the IJ3000 automatically
calculates the checksum character
and adds it to the end of the bar code
data.
Message with variable field
Message with logo