Illinois Tool Works IJ300, Руководство по эксплуатации

Страница: 64 / 125

Controller
Section 6: Message Functions
Page 54 of 115 5760-121 Operations Manual Rev B
Editing Fields
A field must be selected before it can
be edited. A selected field is displayed
in red and has a black box around it.
You can select a field by touching the
Next Field button, by pressing the
Tab key, or by touching the field
directly. When using the Next Field
button or Tab key, the fields are
selected one after another in the order
in which they were added to the print
message.
When a field is selected, the back-
ground of its corresponding field type
button becomes dark gray. When a
text field is selected, a text box con-
taining the field's text is displayed at the bottom of the screen, the background color of the
Text Field Properties button turns dark gray, and the 'A' on the button turns blue. (See the
following examples.)
Release a selected field by pressing the Enter key, or by selecting another field.
Editing a Text Field:
1. Select the field; its color changes from dark blue to red.
2. To completely replace the existing text, simply begin typing. The new text replaces the
old.
3. To edit the existing text:
•Press and hold the Alt key, then press the Left or Right Arrow key. The field's
color changes from red to light blue and a cursor appears at the beginning (if Left
Arrow is pressed) or end (if Right Arrow is pressed) of the text.
•Use the Left and Right Arrow keys to move the cursor to the edit point.
•Press Backspace to delete characters to the left of the cursor.
•Add new text at the cursor point by typing.
• Press Enter once; the field's color changes from light blue to red.
4. Press Enter to release the field; its color changes from red to dark blue.
Text field selected
Count field selected