86
accepted and you transition into the next parameter: Memory Cycle.
If you wish to bypass editing this parameter and move to the next parameter you
can press the Prev or Next soft key.
When the connect mode is ON there will be an underscore _ next to the step
number in the set screen. It will look as follows:
4.6.27 Editing Phase Set
Use the
,
soft keys to navigate to the Phase Set parameter. Pressing the Edit
soft key will provide the following screen:
Phase Set = indicates the Phase Setting mode for operating two instruments in a
master-slave configuration.
Phase Setting Mode: indicates the Phase Setting mode that can be programmed
into the instrument.
4.7
Reviewing Test Results
To review the testing results press the Result soft key in the set screen. You may
have to use the <more> soft key to get to the Results soft key. The screen will
look as follows when you are in the correct screen:
Содержание apt 400XAC Series
Страница 17: ...11 Figure 2 3 4W Configuration Wye Load Figure 3 3 3W Configuration Delta Load...
Страница 18: ...12 Figure 4 1 2W Configuration Figure 5 1 3W Configuration...
Страница 112: ...106 or current EXTP External trigger pulse Trigger one pulse with relation to how the SYNC event is set...
Страница 143: ...137 setting...
