126
10. Options
10.1
Opt. 03
– GPIB Card
This option provides the GPIB card in place of the standard USB/RS-232
interface.
10.2
Opt. 06
– Ethernet Card
The Ethernet Card option provides RS-232 and Ethernet communication
interfaces, as well as barcode scanning capability.
The Ethernet Card has three input/output ports, shown in the following figure:
The port labeled “Barcode” is a PS/2-type connector that is used for the
connection of a barcode scanner. The Ethernet port is for use with a standard
CAT-5 Ethernet cable and may be connected to any compatible PC. The 9-pin D-
type subminiature connector labeled “RS232” is for connection of the APT
400XAC to an RS-232 communication bus.
RS-232 Interface
The protocol for interfacing and communicating using the RS-232 interface can
be found in section
9. Bus Remote Interface USB/GPIB/RS-232
of this manual.
Ethernet Interface
The Ethernet interface provides all of the function control of the standard
USB/RS-232 interface. Some commands are only exclusive to GPIB control.
Default Settings
The default settings for the Ethernet interface are as follows:
IP Setup:
AUTO
Содержание apt 400XAC Series
Страница 17: ...11 Figure 2 3 4W Configuration Wye Load Figure 3 3 3W Configuration Delta Load...
Страница 18: ...12 Figure 4 1 2W Configuration Figure 5 1 3W Configuration...
Страница 112: ...106 or current EXTP External trigger pulse Trigger one pulse with relation to how the SYNC event is set...
Страница 143: ...137 setting...