Ikegami BSH-300, Руководство по эксплуатации

Страница: 36 / 54

㻟㻙㻝㻠㻌 䠏䠊㻸㻯㻰㻌㻿㼏㼞㼑㼑㼚㻌
㻮㻿㻴㻙㻟㻜㻜㻌㻔㼁㻕㻌㻔㻱㻕㻌㻝㻠㻜㻡㻌㼂㻱㻾㻞
ձ
IP ADDRESS
Sets the IP address of this device. The IP address that is set here will be the IP
address corresponding to the MCP back connector and CP back connectors 1 and 2.
The address for MCP that is set here will be displayed as an IP address on the
initial screen.
For switching the channels in the IP ADDRESS setting for C-Type, you can switch
the items on the right corner of LCD screen in the sequence of "MCP CAM"
ń "OCP
CH1" ń "OCP CH2".
㻵㻼㻌㻭㻰㻰㻾㻌㻹㻯㻼㻌㻯㻭㻹㻌
㻝㻥㻞㻚㻝㻢㻤㻚㻜㻜㻝㻚㻞㻜㻜㻌
See "3.3.1 A-Type menu
ձ
IP ADDRESS" for the procedure of setting the
address.
You can change the values for OCP CH1 and OCP CH2 only when the "IP
ADDR.SETTING" in
ն
is set to "RANDOM". When it is set to "SEQUENCE",
you can switch the displays but cannot change the values.
ղ
SUBNET MASK
Sets the subnet mask of this device.
See "3.3.1 A-Type menu
ձ
IP ADDRESS" for the procedure of setting the
address.
ճ
ASSIGN(MCP)
Sets the IP addresses for each camera select of the MCP panel that is connected to
the MCP back connector of this device.
㻭㻿㻿㻵㻳㻺㻌㻹㻯㻼㻌㻯㻭㻹㻜㻝
㻝㻥㻞㻚㻝㻢㻤㻚㻜㻜㻝㻚㻝㻜㻜㻌
You can switch the MCP camera select No. with CAM ʊ on the right upper corner of
the LCD screen.
See "3.3.1 A-Type menu
ձ
IP ADDRESS" for the procedure of setting the
address.
You can change the IP addresses for CAM02 to CAM50 only when the "IP
ADDR.SETTING" in
ն
is set to "RANDOM". When it is set to "SEQUENCE",
you can switch the displays (except for CAM01) but cannot change the IP
addresses.