Ikegami BSH-300, Руководство по эксплуатации

Страница: 31 / 54

䠏䠊㻸㻯㻰㻌 㻿㼏㼞㼑㼑㼚㻌 㻟㻙㻥㻌
㻮㻿㻴㻙㻟㻜㻜㻌㻔㼁㻕㻌㻔㻱㻕㻌㻝㻠㻜㻡㻌㼂㻱㻾㻞
VI. Once all items are set, turn the MENU switch to move the underline to the
"SET" item.
Jan. 01 2014
07
㸸
00
㸸
00 SET
VII.
If the MENU switch is pressed in this state, the date and time are confirmed,
and the MENU screen is moved back one hierarchy.
If you do not perform the "SET" operation and just exit the screen using the
CANCEL switch, etc., all settings in the DATE/TIME screen reverts to the
screen it was before you changed it.
* The subsequent procedure for the DATE/TIME setting is omitted as it is the same as
the above.
յ
IP ADDR.SETTING
Selects whether to make the setting of IP address "SEQUENCE" or "RANDAM".
SEQUENCE: The IP addresses are set in sequence, starting from CH1. You cannot
change the IP addresses of CH2 to CH6 in this setting.
RANDOM: The IP addresses can be set for each channel. You can change the IP
addresses of CH1 to CH6 in this setting.
ն
PROGRAM UPDATE
Updates the firmware of this device. The update procedure is described below.
I. Connect the USB memory that contains RDF file for update to the USB connector of
this device.
II. Open the menu screen. Press the MENU switch in the PROGRAM UPDATE section
to open the PROGRAM UPDATE execution screen.
PROGRAM UPDATE
CANCEL
III. When the MENU switch is turned in the PROGRAM UPDATE screen, the letters
"START" is displayed.
PROGRAM UPDATE
START
IV. Press the MENU switch while the letters "START" are displayed to display the
RDF file name that is stored in a USB memory. (The RDF file name extension is
".RDF" or ".rdf".)
PROGRAM UPDATE
BSH300.RDF
If the USB memory is not connected or the RDF file does not exit, [NO RDF
FILE] is displayed.
Only half-size alphanumeric characters can be correctly displayed in this
device. Characters other than half-size alphanumeric characters will not be
correctly displayed.