Ikegami BSH-300, Руководство по эксплуатации

Страница: 21 / 54

䠎䠊㻼㼍㼞㼠㻌 㻺㼍㼙㼑㼟㻌 㼍㼚㼐㻌 㻲㼡㼚㼏㼠㼕㼛㼚㼟㻌 㻞㻙㻟㻌
㻮㻿㻴㻙㻟㻜㻜㻌㻔㼁㻕㻌㻔㻱㻕㻌㻝㻠㻜㻡㻌㼂㻱㻾㻞
11. AC inlet
This is a power input connector for BSH-300. This can support AC100 - 240V without
switching.
12.
Connectors by type
Connectors vary depending on the device type.
A-Type: consists of six CP connectors (female plugs). Control panel that is not compatible with
Ethernet is connected with CP cable.
B-Type: consists of six BS/CCU connectors (male plugs). BS/CCU that is not compatible with
Ethernet is connected with CP cable.
C-Type: consists of two CP connectors (female plugs) and one MCP connector (female plug).
Panel that is not compatible with Ethernet is connected with CP cables and MCP
cable.
13. SYSTEM connector
This is a function extension connector.
See "7.2 Pin function of external connector" for pin function.
14.
PREVIEW connector
When the PREVIEW switch of OCP is pressed, the terminal of channel that supports the
controlled BS/CCU will be short-circuited. Hence, the preview function is still available when
the panel assignment is made.
See "5 Video switching" for details. Also see "7.2 Pin function of external
connector" for pin function.
15.
LAN connector
BS/CCU and control panel that are compatible with Ethernet are connected with LAN cable.