Ikegami BS-98 Скачать руководство пользователя страница 70

Страница: 70 / 118

BS-98 1409 VER1 (U) (E)

5.1 Settings from the BS Menu

■

Displaying the Submenu

You can perform various settings on the submenu that is displayed from the main menu on the PM screen.

Make sure that the main menu is displayed on the PM
screen.

Turn the MASTER PEDESTAL control knob or IRIS
control knob on the MCP to position the ﬂashing cursor
on the setting item, and press the CALL button.

The submenu appears, on which you can perform various
settings.

CAUTION:

Depending on the functions of the setting items, some items change the setting when the knob is turned; others change the setting
when the CALL button is pressed.

Note:

- To return to the main menu, select " " and press the CALL button.
- The

ashing item on the submenu indicates the currently focused item. This

ashing status is called the "

ashing cursor" hereafter

(displayed in gray in the display example).

- Each time the CALL button is pressed, the

ashing cursor switches to setting item -> mode selection -> setting item -> mode

selection and so on.

■

Exiting the Menu

This section explains how to exit the main menu/submenu on the PM screen.

Exit the menu screen in the any of the following methods

a) Select " " on the BS/CCU main menu and press the CALL button.
b) Press the BARS button (to OFF COLOR BARS).

The main menu/submenu disappears.

ＦＩＬＥＳＥＬＥＣＴＥＮＧＩＮＥＥＲ−１
ＬＯＡＤＳＴＡＲＴＳＴＡＲＴ

ＰＲＥＳＥＴＦＩＬＥＬＯＡＤ

Mode setting

Setting items

Содержание BS-98























































































































Результаты поиска

Содержание BS-98

Отзывы:

Ikegami BS-98, Руководство по эксплуатации, Страница: 70 / 118

Результаты поиска

Содержание BS-98

Отзывы: