Ikegami BS-98 Скачать руководство пользователя страница 30

Страница: 30 / 118

BS-98 1409 VER1 (U) (E)

2.1 BS-98

Front

View

BS-98 Front View With the Front Cover Off

② OPT module

④ SPRC module

⑥ IO module

① RET module

③ HPRC
module

⑤ PLS module

Note:

④

SPRC module is optional.

When the SPRC module is not mounted, "OUT-3" output of the VOUT module on the rear side and "PM OUT" SD-SDI signal cannot
be selected.
At the same time, "ENC OUT" (analog VBS signal) is not output.

①

RET module

The detection status of the RETURN signal and the mode are indicated.

Light up when the input signal of RETURN channel#1
has been detected.

IN1

Lights up when It has set the Active loop through.

THRU

Light up when the input signal of RETURN channel#2
has been detected.

IN2

Light up when the input signal of RETURN channel#3
has been detected.

IN3

Lights up when It has set the Active loop through.

THRU

Light up when the input signal of RETURN channel#4
has been detected.

IN4

USB connector for maintenance and service.

Note:

The active loop through output executes the through output only when the equipment power is on.

Содержание BS-98























































































































Результаты поиска

Содержание BS-98

Отзывы:

Ikegami BS-98, Руководство по эксплуатации, Страница: 30 / 118

Результаты поиска

Содержание BS-98

Отзывы: